Outdoor Wireless Door bell Chime Kit 300M Remote Control Home Welcome My Melody Ring Doorbell
Dear Friends,this wireless doorbell need work with 23A 12V Battery,Package not including the battery, please note and buy it yourself.!
Product Description in English after Portuguese
Product parameters
Receiver parameters
1. Working Voltage: AC 100-250V 60Hz/50Hz
2. Power consumption: ≤0.5W
3. Operating Frequency: 433.92 MHz
4. Operating temperature: -10°C~+45°C
5. Volume: 25~85dB (3-level volume adjustable)
6. Receiver Size: L95×W54×H68mm
Transmitter button parameters
1. Working Voltage: 12V
1. Battery Type: 23A 12V
2. Transmitter Size: L80×W45×H21mm
Features:
Differentially set ringtones: Different buttons set different ringtones, easily distinguish between front and rear doors
Built-in 38 level welcome music volume adjustable
This doorbell needs no wiring, plug and play, convenient and practical, easy to install
The receiver is suitable for direct plug-in, the applicable voltage range is 100-250V 50/60Hz
Applicable scenarios: residential, hotel, villa, hospital
Function: Learning Code
Remote Control Distance: Indoor distance is about 50 meters (without partition), outdoor open space is about 100-300 meters. (This Data is the experimental test distance. The actual distance is affected by the environment and applicable obstacles. The more obstacles, the shorter the distance. The actual distance is subject to the distance of the experimental environment)
how to use
Packed products are paired before leaving the factory, and do not need to be paired again.
To replace transmitters or add transmitters, do the following:
Pairing method
The receiving outlet plugs into a regular household outlet. When the power is on, (if different transmitters need to match different ringtones, first press the music button to select ringtone), and then press the receiver mode button for about 5 seconds until the indicator light flashes . Enter pairing mode, at this time, press the transmitter, the receiver rings, the pairing is successful.
clear code
Press and hold the pairing button on the receiver for about 10-13 seconds until the indicator light quickly lights up
After flashing, stop flashing, i.e. clear all pairing codes.
**************************************************** *
Product parameters
Receiver parameters
1. Working voltage: AC 100-250V 60Hz/50Hz
2. Power consumption: ≤0.5W
3. Operating frequency: 433.92 MHz
4. Operating temperature: -10°C~+45°C
5. Volume: 25~85dB (3-level volume adjustable)
6. Receiver size: L95×W54×H68mm
Transmitter button parameters
1. Working voltage: 12V
1. Battery type: 23A 12V
2. Transmitter size: L80×W45×H21mm
Features:
Differentially set ringtones: Different buttons set different ringtones, easily distinguish between front and rear doors
Built-in 38 welcome music/3-level volume adjustable
This doorbell does not need wiring, plug and play, convenient and practical, easy to install
The receiver is suitable for direct plug-in, the applicable voltage range is 100-250V 50/60Hz
Applicable scenarios: residential, hotel, villa, hospital
Function: Learning Code
Remote control distance: Indoor distance is about 50 meters (without partition),Outdoor open space is about 100-300 meters. (This data is the experimental test distance. The actual distance is affected by the applicable environment and obstacles. The more obstacles, the shorter the distance. The actual distance is subject to the experimental environment distance)
How to use
Packaged products are paired before they leave the factory, and no need to pair again.
To replace transmitters or add transmitters, from the following:
Pairing method
The receiver socket is plugged into a regular household socket. When the power is on, (if different transmitters need to correspond to different ringtones, first press the music button to select the ringtone) and then press the receiver mode button for about 5 seconds until the indicator light flashes. Enter the pairing mode, at this time, press the transmitter, the receiver rings, the pairing is successful.
clear the code
Press and hold the receiver pairing button for about 10-13 seconds until the indicator light quickly
After blinking, stop blinking, that is, clear all pairing codes.
